Skip to content

GPIO

GPIO (general-purpose input/output) is a series of digital interfaces that can be used to connect relays, LEDs, sensors, and other components.

Warning

  • Before using GPIO on PiKVM v3 HAT, carefully study the purpose of its ports.
  • Using GPIO on a PiKVM was designed as a feature for advanced users, so please familiarize yourself with the topic to make sure you understand how to use use it before setting it up.
  • Careless usage of GPIO can damage your Raspberry Pi or components.

When talking about PiKVM and GPIO it refers not solely to the physical interface of the Raspberry Pi, but also to various plugins (for example, for USB relays) that can also be used transparently by emulating an abstract GPIO API.


Basics

Setting up GPIO is considerably complex. The interface is divided into several layers for flexibility. Any configuration is performed using a file /etc/kvmd/override.yaml which uses the YAML syntax. We will look at each part of the configuration individually with an example for each. Sections should be combined under shared keys.

  • Wrong:

    kvmd:
        gpio:
            drivers: ...
    kvmd:
        gpio:
            scheme: ...
    
  • Correct:

    kvmd:
        gpio:
            drivers: ...
            scheme: ...
    

Drivers

The first part of the configuration refers to the hardware layer, which defines which IO channels are used (standard GPIO pins of the Raspberry Pi, an USB relay, and so on). If you just want to use GPIO with the default settings you can skip to the next section Scheme.

Each hardware input/output requires a individual driver configuration entry. Each driver has a type (which refers to the plugin that handles the communication between PiKVM and the hardware) and a unique name. This allows you to either can add multiple drivers of the same type with different settings or connect multiple USB HID relays.

Note

Each driver requires a unique name. Names surrounded by double underscore are system reserved and should not be used.

The only exception to this is the default GPIO driver with the name __gpio__, representing the physical GPIO interface of the Raspberry Pi. The configuration section for __gpio__ is only required in your /etc/kvmd/override.yaml if you want to change the default settings. It can be omitted if you are fine with the defaults.

kvmd:
    gpio:
        drivers:
            # This example shows how the default __gpio__ driver settings can be changed. It can be omitted if you are fine with the defaults.
            __gpio__:  # Names surrounded by double underscore are system reserved
                type: gpio  # Refers to the plugin name handling the communication

            # You can define another gpio driver for some reason
            my_gpio: 
                type: gpio

            # Example for a USB HID relay connected to PiKVM
            relay:
                type: hidrelay
                device: /dev/hidraw0  # The path to the linux device

Scheme

The second part defines how the various driver channels are configured. Each channel has a unique name, a mode (input or output), a pin number, and a reference to the driver configured in the previous part.

Note

Names that starts and ends with two underscores (like __magic__) are reserved.

Two interaction modes are available for outputs: pulse and switch. In pulse mode, the output quickly switches its state to logical 1 and back (just like pressing a button). In switch mode, it saves (toggles) the state that the user set. When PiKVM is started/rebooted (any time the KVMD daemon is started or stopped) all output channels are reset to 0. This can be changed using the initial parameter. For example, initial=true for logic 1 on startup.

If you don't specify a driver for the channel in the scheme the default driver, __gpio__ will be used.

Parameter Type Allowed values Default Description
led1, button1, relay1, etc. string a-Z, numbers, _, - A section for the named channel
driver string a-Z, numbers, _, - Optional, Name of the section defined above in Drivers if not GPIO
pin integer X >= 0 Refers to a GPIO pin or driver's pin/port
mode enum input or output Defines if a channel is used for input or output, may be limited by driver plugin
Input only
debounce float x >= 0 0.1 Debounce time in seconds. 0 for disable debounce
Output only
switch bool true or false true Enables or disables the switch mode on the channel (enabled by default).
initial nullable bool true, false or null false Defines the initial state of the switch upon boot, null for don't make changes (the last one does not supported by generic GPIO)
inverted bool true or false false Inverts the active logical level
pulse A section header to define switch pulse configuration
delay float X >= 0 0.1 Defines the pulse time in seconds, 0 for disable pulsing
min_delay float X >= 0.1 0.1
max_delay float X >= 0.1 0.1
kvmd:
    gpio:
        scheme:
            # A certain device sends signals to the RPi and we want the PiKVM to display this as an led
            led1:
                pin: 19 # GPIO pin number on the RPi
                mode: input 
            led2:
                pin: 16
                mode: input 

            # Two outputs of RPi's GPIO
            button1:
                pin: 26 # GPIO pin number on the RPi
                mode: output
                switch: false  # Disable switching, only pulse available
            button2:
                pin: 20
                mode: output
                switch: false

            relay1:  # Channel 1 of the relay /dev/hidraw0
                driver: relay  # Not GPIO, so add name from the above Drivers section
                pin: 0  # Numerating starts from 0
                mode: output  # Relays can't be inputs
                initial: null  # Don't reset the state to 0 when initializing and terminating KVMD
            relay2:  # Channel 2
                driver: relay
                pin: 1
                mode: output
                initial: null
                pulse:
                    delay: 2  # Default pulse value
                    max_delay: 2  # The pulse interval can be between min_delay=0.1 (by default) and max_delay=2

View

This is the last part of the required configuration. It defines how the previous driver and channel configuration is rendered on the Web interface. Here's an example for the example configuration above:

kvmd:
    gpio:
        view:
            header:
                title: Switches  # The menu title
            table:  # The menu items are rendered in the form of a table of text labels and controls
                - ["#Generic GPIO leds"]  # Text starting with the sharp symbol will be a label
                - []  # creates a horizontal separator and starts a new table
                - ["#Test 1:", led1, button1]  # Text label, one input, one button with text "Click"
                - ["#Test 2:", led2, button2]
                - []
                - ["#HID Relays /dev/hidraw0"]
                - []
                - ["#Relay #1:", "relay1|Boop 0.1"]  # Text label and button with alternative text
                - ["#Relay #2:", "relay2|Boop 2.0"]

This will be rendered as:

drawing

Some rules and customization options:

  • Text starting with the # symbol will be a label.
  • To place a channel in a cell, use the name you defined in the scheme.
  • Inputs are displayed as round LEDs.
  • Outputs are displayed as a switch AND a button.
  • If the switch mode is disabled, only a button will be displayed. If pulse is disabled, only a switch will be shown.
  • To change the LED's color specify it after the channel name like "led1|red". Available: green, yellow and red.
  • To change title of the button, write some its name like "relay1|My cool relay".
  • Buttons and switches can request confirmation on acting. To do this write its name like "relay1|confirm|My cool relay". The third argument with a title is required in this case.
  • The button can automatically close the menu when clicked. Use something like "relay1|hide|My button". It can be used with confirmation option: "relay1|confirm,hide|My button".

Also you can place some leds in the menu title using the similar syntax:

kvmd
    gpio:
        view:
            header:
                title: ["#Test1:", led1, "Test2:", led2]

Hardware modules and pseudo-drivers

Raspberry's GPIO

Click to view

The driver gpio provides access to regular GPIO pins with input and output modes. It uses /dev/gpiochip0 and the libgpiod library to communicate with the hardware. Does not support saving state between KVMD restarts (meaning initial=null).

You can use the interactive scheme when selecting the pins to use. Please note that when selecting a pin for a channel, you need to use a logical number instead of a physical number. That is, if you want to use a physical pin with the number 40, the channel must have the number 21 corresponding to the logical GPIO21.

Channels should not use duplicate pins. You can also not use already used pins. To see which pins are currently used, run the command gpioinfo.

USB HID Relay

Click to view

The driver hidrelay provides access to cheap managed USB HID relays that can be found on AliExpress. This driver does not support input mode, only output. To use it, you need to specify the path to the device file (like /dev/hidraw0) using the device parameter.

Additionally, we recommend to configure access rights and static device name using UDEV rules. For example, create /etc/udev/rules.d/99-kvmd-extra.rules:

KERNEL=="hidraw[0-9]*", SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05df", GROUP="kvmd"

Channels should not use duplicate physical numbers. The driver supports saving state between KVMD restarts (meaning initial=null).

ezCoo KVM switch

Click to view

You can use GPIO to control KVM port switching. This usually requires the use of relays and buttons, but for the ezCoo switch there is a special ezcoo driver that simulates GPIO by sending commands to the switch via serial port. So you can make a menu in PiKVM to control the multiport switch.

IPMI

Click to view

The driver ipmi provides the ability to send IPMI commands (on, off, reset) and show the power status of the remote host. In fact, this is not a hardware driver, but something like a pseudo-GPIO. Each "pin" is actually responsible for a specific IPMI operation of ipmitool:

Pin Type Command
0 input ipmitool ... power status, can be used to draw the LED in the menu
1 output ipmitool ... power on, sends the on command (and only this), so like all other outputs it should be a button
2 output ipmitool ... power off
3 output ipmitool ... power cycle
4 output ipmitool ... power reset
5 output ipmitool ... power diag
6 output ipmitool ... power soft

You are supposed to define one driver per host:

kvmd:
    gpio:
        drivers:
            my_server:
                type: ipmi
                host: myserver.local
                user: admin
                passwd: admin
        scheme:
            my_server_status:
                driver: my_server
                pin: 0
                mode: input
            my_server_on:
                driver: my_server
                pin: 1
                mode: output
                switch: false
            my_server_off:
                driver: my_server
                pin: 2
                mode: output
                switch: false
        view:
            table:
                - [my_server_status, "my_server_on|On", "my_server_off|Off"]

Wake-on-LAN

Click to view

The driver wol provides a simple generator of Wake-on-LAN packages. One driver and one output are generated for one host if a simplified configuration method is used. However, you can define multiple drivers if you want to manage different hosts. One driver controls one host, and can only be used as an output. Pin numbers are ignored.

kvmd:
    gpio:
        drivers:
            wol_server1:
                type: wol
                mac: ff:ff:ff:ff:ff:f1
            wol_server2:
                type: wol
                mac: ff:ff:ff:ff:ff:f2
                ip: 192.168.0.100
                port: 9
        scheme:
            wol_server1:
                driver: wol_server1
                pin: 0
                mode: output
                switch: false
            wol_server2:
                driver: wol_server2
                pin: 0
                mode: output
                switch: false
        view:
            table:
                - ["#Server 1", "wol_server1|Send Wake-on-LAN"]
                - ["#Server 2", "wol_server2|Send Wake-on-LAN"]

CMD

Click to view

The cmd driver allows you to run custom command on PiKVM OS.

Note

This driver does not support bash operators, that is, it is a direct call to commands with arguments. For more complex cases, write your own shell scripts.

Commands are executed from the user kvmd. If you want to run the command as root, then you need to configure sudo. Example of the /etc/sudoers.d/custom_commands:

Granular example

kvmd ALL=(ALL) NOPASSWD: /usr/bin/reboot

NON Granular example (Captures ALL commands)

kvmd ALL=(ALL) NOPASSWD: ALL

Example of the /etc/kvmd/override.yaml:

kvmd:
    gpio:
        drivers:
            reboot:
                type: cmd
                cmd: [/usr/bin/sudo, reboot]
        scheme:
            reboot_button:
                driver: reboot
                pin: 0
                mode: output
                switch: false
        view:
            table:
                - ["reboot_button|confirm|Reboot PiKVM"]

An example to help you get started:

  • cmd: [/usr/bin/sudo, kvmd-otgconf, --disable-function, mass_storage.usb0]
  • cmd: [(absolute path to sudo, command, flag, flag, absolute path to file]

Then run the following:

systemctl restart kvmd

PWM

Click to view

The pwm driver allows you to use some GPIO pins on the Raspberry Pi for PWM.

Note

Due to hardware limitations, this module conflicts with the kvmd-fan (the fan controller) on PiKVM V3 and V4 Plus. To use it, you have to use hardware PWM for kvmfan. To do this, add the following lines to /etc/kvmd/fan.ini:

[main]
pwm_soft = 80

Not needed for V4 Mini because it does not have a fan.

Here the small example with servo control:

  1. Add some params to /boot/config.txt:

    • For PiKVM V3 or DIY device to enable PWM0_0 on RPi GPIO18:

      dtoverlay=pwm
      
    • For PiKVM V4 to enable PWM0_0 on CM4 GPIO12 (CN5 NeoPixel Pin) and set the PWM function to 4 (ALT0):

      dtoverlay=pwm,pin=12,func=4
      
  2. Create /etc/udev/rules.d/99-kvmd-pwm.rules:

    SUBSYSTEM=="pwm*", ACTION=="add", RUN+="/bin/chgrp -R kvmd /sys%p", RUN+="/bin/chmod -R g=u /sys%p"
    SUBSYSTEM=="pwm*", ACTION=="change", ENV{TRIGGER}!="none", RUN+="/bin/chgrp -R kvmd /sys%p", RUN+="/bin/chmod -R g=u /sys%p"
    
  3. Connect Servo motor like SG90 PWM connection to RPi GPIO18 or CM4 GPIO12, +5V and GND to a 5V and GND pin on header:

  4. Add to /etc/kvmd/override.yaml

    kvmd:
        gpio:
            drivers:
                servo1:
                    type: pwm
                    chip: 0                      # PWM Chip Number
                    period: 20000000             # Servo Motor SG90 Period in nano-seconds
                    duty_cycle_push: 1500000     # Servo Motor SG90 duty_cycle for pushing button
                    duty_cycle_release: 1000000  # Servo Motor SG90 duty_cycle for releasing button
            scheme:
                __v4_locator__:  # v4-mini only
                    pin: 18      # v4-mini only
                short_press:
                    driver: servo1
                    pin: 0  # Pin number is the PWM channel number on the PWM Chip
                    mode: output
                    switch: false
                    pulse:
                        delay: 0.5
                        max_delay: 2
                long_press:
                    driver: servo1
                    pin: 0
                    mode: output
                    switch: false
                    pulse:
                        delay: 2
                        max_delay: 2
                extra_long_press:
                    driver: servo1
                    pin: 0
                    mode: output
                    switch: false
                    pulse:
                        delay: 10
                        max_delay: 20
            view:
                header:
                    title: Controls
                table:
                    - ["#Servo - Short Press", "short_press|Press"]
                    - ["#Servo - Long Press", "long_press|Press"]
                    - ["#Servo - Extra Long Press", "extra_long_press|Press"]
    

Servo

Click to view

The servo module is built on top of the pwm module and allows user to define angles instead of duty_cyles to control a PWM enabled servo motor like SG90. When the button is pressed the servo motor moves to an angle defined by angle_push and when button is released it moves back to angle_release. In the example configuration for a cheap 5V SG90 Servo, the motor moves to an angle of 45 degrees when button is pressed and moves back to 20 degress when released.

Note

Due to hardware limitations, this module conflicts with the kvmd-fan (the fan controller) on PiKVM V3 and V4 Plus. To use it, you have to use hardware PWM for kvmfan. To do this, add the following lines to /etc/kvmd/fan.ini:

[main]
pwm_soft = 80

Not needed for v4-mini because it does not have a fan.

To use Servo motors in PiKVM you need to follow steps 1-3 for PWM Module and then use the following configuration.

Add to /etc/kvmd/override.yaml:

kvmd:
    gpio:
        drivers:
            servo1:
                type: servo
                chip: 0                  # PWM Chip Number
                period: 20000000         # Servo Motor SG90 Period in nano-seconds
                duty_cycle_min: 350000   # Servo Motor SG90 duty_cycle for -90 degrees
                duty_cycle_max: 2350000  # Servo Motor SG90 duty_cycle for +90 degrees
                angle_max: 90            # Servo Motor SG90 angle at duty_cycle_max
                angle_min: -90           # Servo Motor SG90 angle at duty_cycle_min
                angle_push: 45           # Servo Motor SG90 angle to push button
                angle_release: 20        # Servo Motor SG90 angle to release button
        scheme:
            scheme:
                __v4_locator__:  # v4-mini only
                    pin: 18      # v4-mini only
                short_press:
                    driver: servo1
                    pin: 0  # Pin number is the PWM channel number on the PWM Chip
                    mode: output
                    switch: false
                    pulse:
                        delay: 0.5
                        max_delay: 2
                long_press:
                    driver: servo1
                    pin: 0
                    mode: output
                    switch: false
                    pulse:
                        delay: 2
                        max_delay: 2
                extra_long_press:
                    driver: servo1
                    pin: 0
                    mode: output
                    switch: false
                    pulse:
                        delay: 10
                        max_delay: 20
        view:
            header:
                title: Controls
            table:
                - ["#Servo - Short Press", "short_press|Press"]
                - ["#Servo - Long Press", "long_press|Press"]
                - ["#Servo - Extra Long Press", "extra_long_press|Press"]

Philips Hue

Click to view

The hue module can control smartplugs and lamps over Philips Hue Bridge API. In general the plugin can switch any device on/off which is connected to the bridge. To use it you will need API token aka username:

  1. Open http://bridge/debug/clip.html.
  2. In the URL: Field type /api/.
  3. In the Message Body: Field type: {"devicetype": "pikvm"}.
  4. Hit the Get Button.
  5. As the Response you become the Username: {"success": {"username": "apiusername"}.

Example:

kvmd:
    gpio:
        drivers:
            hue:
               type: hue
               url: http://bridge
               token: YG-xxxxxxxxxxxx
        scheme:
            plug_button:
                driver: hue
                pin: 32
                mode: output
                initial: null
                switch: true
                pulse:
                    delay: 0
            plug_led:
                driver: hue
                pin: 32
                mode: input
        view:
            table:
                - ["plug_led", "plug_button"]

ANEL NET-PwrCtrl

Click to view

The anelpwr plugin allows you to use ANEL NET-PwrCrtl IP-PDUs (switchabel sockets) as gpios. There are up to 8 Ports per PDU. Input pulls the the current state from the PDU, Output switches the Socket.

kvmd:
    gpio:
        drivers:
            anel_pdu_0:
                type: anelpwr
                url: http://IP:port
                user: admin
                passwd: anel
        scheme:
            pdu0_0_pwr:
                pin: 0
                driver: anel_pdu_0
                mode: output
                pulse:
                    delay: 0
            pdu0_0_led:
                pin: 0
                driver: anel_pdu_0
                mode: input
        view:
            header:
               title: "PDUs"
            table:
                - ["#PDU0"]
                - []
                - ["#PDU0_Port0:", pdu0_0_led, "pdu0_0_pwr|confirm|test"] 

Extron SW Series Switchers

Click to view

The extron plugin allows you to control Extron SW series switchers (ex. SW4 USB, SW4 VGA, etc.). There are up to 4 Ports per switcher. Input pulls the the current state from the switcher, Output switches the active port.

kvmd:
    gpio:
        drivers:
            extron_vga:
                type: extron
                device: /dev/ttyUSB0  # The path to the RS-232 serial adapter
        scheme:
            vga_port1_led:
                pin: 0
                driver: extron_vga
                mode: input
            vga_port2_led:
                pin: 1
                driver: extron_vga
                mode: input
            vga_port3_led:
                pin: 2
                driver: extron_vga
                mode: input
            vga_port4_led:
                pin: 3
                driver: extron_vga
                mode: input
            vga_port1_button:
                pin: 0
                driver: extron_vga
                mode: output
            vga_port2_button:
                pin: 1
                driver: extron_vga
                mode: output
            vga_port3_button:
                pin: 2
                driver: extron_vga
                mode: output
            vga_port4_button:
                pin: 3
                driver: extron_vga
                mode: output
        view:
            header:
               title: "Extron SW4 VGA"
            table:
                - ["vga_port1_led|red", "vga_port1_button||Port 1"]
                - ["vga_port2_led|red", "vga_port2_button||Port 2"]
                - ["vga_port3_led|red", "vga_port3_button||Port 3"]
                - ["vga_port4_led|red", "vga_port4_button||Port 4"]